Shop - OptoYag&SLT M

table-Opto-YagSLT-M2_2017
table-Opto-YagSLT-M2_2017

OptoYag&SLT M

OptoYag M
OptoSLT M

YAG LASER ADVANTAGES

  • short treatment times
  • reduced risk of IOL pitting
  • greater patient comfort

SLT LASER ADVANTAGES

  • laser light stimulates the body’s own healing response to lower eye pressure
  • effective as primary, adjunctive or repeat therapy
  • safe, office-based procedure
  • reimbursed by most insurance policies

OPTOYAG&SLT IS A COMBINED UNIT WHICH INCLUDES:

  • Q-switched Nd:YAG laser (1064 nm)
  • frequency doubled Q-switched Nd:YAG laser (532 nm)
Both lasers are integrated into the e-SlitLight. OptoYag&SLT is a photodisruptor and SLT laser combined into a single piece of equipment. It can be used for Capsulotomy, Iridotomy and Selective Laser Trabeculoplasty treatments.
Category:
  • Description
  • Key features
  • Technical specifications
  • Slit Lamp
  • System Dimension
  • Weight

Description

YAG LASER ADVANTAGES

  • short treatment times
  • reduced risk of IOL pitting
  • greater patient comfort

SLT LASER ADVANTAGES

  • laser light stimulates the body’s own healing response to lower eye pressure
  • effective as primary, adjunctive or repeat therapy
  • safe, office-based procedure
  • reimbursed by most insurance policies

OPTOYAG&SLT IS A COMBINED UNIT WHICH INCLUDES:

  • Q-switched Nd:YAG laser (1064 nm)
  • frequency doubled Q-switched Nd:YAG laser (532 nm)
Both lasers are integrated into the e-SlitLight. OptoYag&SLT is a photodisruptor and SLT laser combined into a single piece of equipment. It can be used for Capsulotomy, Iridotomy and Selective Laser Trabeculoplasty treatments.

PPS™ – PULSE TO PULSE STABILITY

Optotek has spent extra time and effort to ensure highest reliability and safety of the system. The OptoYag&SLT M incorporates a PPS™ technology for delivering stable output energy far exceeding current industry standards. Enhanced accuracy and stability of energy provide the highest degree of safety and assure effective and efficient eye treatments.

E-SLITLIGHT™

HIGH POWER LED ILLUMINATION SYSTEM

Tired of replacing slit lamp bulb? Want to have a brighter light? The e-SlitLight™ LED slit lamp offers thousands of hours of bright white light originating from the solid state LED light source. The LED illumination enhances color, detail and contrast and therefore significantly improves imaging. Additionally, its minimal heat emission makes the treatment comfortable even for dry eye patients.

FES™ - FINE ENERGY SETTING

FOR UNMATCHED PRECISION

Advanced technical solutions and sophisticated electronics incorporated into the OptoYag&SLT M allow for a precise adjustment of energy in order to match the specific needs of the therapy or the patient. The fine energy setting buttons are conveniently located just next to the joystick, offering the physician easy and accurate adaptation of energy to the patient’s eye response.

PPS™ - PULSE TO PULSE STABILITY

FOR ADVANCED SAFETY

Optotek has spent extra time and effort to ensure highest reliability and safety of the system. The OptoYag&SLT M incorporates a PPS™ technology for delivering stable output energy far exceeding current industry standards. Enhanced accuracy and stability of energy provide the highest degree of safety and assure effective and efficient eye treatments.

TREATMENT AT 3 HZ

FOR HIGHER PERFORMANCE

The OptoYag&SLT M with newly designed laser cavity and optimized system configuration features repetition rate at 3 Hz. Faster treatment shifts physician’s productivity and patient’s comfort to a completely new level.

EASY-TO-MOVE SYSTEM

Convenient portable design allows ophthalmologists to change location with ease. Having electronics box underneath the table, the system can be moved freely to another worktop and therefore instantly ready for use.

EASE OF USE

High level solutions and sophisticated electronics provide owners with an excellent diagnostic tool, photodisruptor and SLT laser. Located next to the joystick, the fine energy setting buttons, enable the physician to adapt the energy used to the clinical needs and keeping continously control throughout the treatment.

MECHANICAL PRECISION AND OPTICAL QUALITY

OptoYag&SLT is made with special care. High quality optical and mechanical components are made in-house or in close cooperation with suppliers within the EU.

Laser

YAG Mode

Laser Source Q-switched Nd:YAG
Wavelength 1064 nm
Energy 0,5 to 10 mJ per pulse in 30 steps
Spot Size < 10 μm
Cone Angle 16°
Offset Selectable: 150μm anterior;,0; 150, 300 μm posterior
Pulse Rate Up to 3 Hz
Burst Mode 1, 2 and 3 pulses
Pulse Duration 4 ns (typical)
Aiming Beam Red dual diode; 650 nm;,continuously adjustable intensity(635, 670 nm optionally)
Laser Trigger Joystick (footswitch optionally)
Cooling System Air convection

SLT Mode

Laser Source Q switched, frequency doubled Nd:YAG
Wavelength 532 nm
Energy 0,2 to 2,6 mJ per pulse in 33 steps
Spot Size 400 μm
Cone Angle < 3°
Offset Not applicable
Pulse Rate Up to 3 Hz
Burst Mode Single pulse
Pulse Duration 4 ns (typical)
Aiming Beam Red diode; 650 nm; continuously,adjustable intensity(635, 670 nm optionally)
Laser Trigger Joystick (footswitch optionally)
Cooling System Air convection
Type e-SlitLight™
Illumination Source White LED
Magnification 10x, 16x, 25x (6x, 10x, 16x, 25x, 40x optionally)

 

Table

Type Central mounted
Dimensions 600 x 480 mm

YAG Laser Dimensions 125 x 257 x 68 mm
SLT Laser Dimensions 240 x 150 x 60 mm
Total System Height 695 – 730 mm
Total Net Weight 23 kg

 

Electrical Requirement

Power Supply 100 – 240 V, 50 – 60 Hz, 1,1 A MAX

Accessories

Optional Accessories Motorized lifting mechanism, Footswitch, Elbow support, Beam splitter with co-observation tube, Warning light, Magnification changer (5x)

Related Products

  •
    Read more
    Quick View
    0 out of 5

    OptoSLT nano

    Preserve vision in record time

    THE FIRST 1 NS SLT DEVICE ON THE MARKET

    Selective Laser Trabeculoplasty (SLT) is an advanced, non-invasive, primary or secondary treatment for raised intraocular pressure (IOP) in glaucoma. It uses short laser pulses of a specific wavelength to selectively target pigmented trabecular meshwork cells without causing widespread thermal damage. Standard SLT utilises a low-energy laser with a short pulse duration of 3-5 ns. This low-energy irradiation stimulates removal of damaged cells by macrophages and increases trabecular network porosity to restore effective aqueous outflow through the drainage angle. This results in the reduction of IOP to non-pathologic levels.

    Read more
    Quick View
  •
    Read more
    Quick View
    0 out of 5

    OptoSLT M

    ADVANTAGES:

    • laser light stimulates the body’s own healing response to lower eye pressure
    • effective as primary, adjunctive or repeat therapy
    • safe, office-based procedure
    • reimbursed by most insurance policies
    OptoSLT is a laser for Selective Laser Trabeculoplasty. This is a laser procedure used to treat open angle glaucoma by reducing the pressure within the eye. The laser system is a Q-switched frequency doubled Nd:YAG laser emitting short pulses at the wavelength of 532 nm. OptoSLT emits pulses at levels from 0.2 to 2.6 mJ. Red laser diode aiming beam with continuous power adjustment allows precise targeting of the SLT laser. OptoSLT can be integrated into the e-SlitLight or adapted to various slit lamps.
    Read more
    Quick View
  •
    Read more
    Quick View
    0 out of 5

    OptoYag M

    ADVANTAGES:

    • short treatment times
    • reduced risk of IOL pitting
    • greater patient comfort

    OptoYag is a Photodisruptor for Capsulotomy and Iridotomy treatments. It is a Q-switched Nd:YAG laser emitting short pulses at the wavelength of 1064 nm. The laser is integrated into the e-SlitLight. The OptoYag emits pulses at levels from 0.5 to 10 mJ. A dual red diode aiming beam with continuous power adjustment allows precise focusing of the YAG laser.

    Read more
    Quick View